Connection Settings for LANSetting Values ExplanationIP Address 1.0.0.0–223.255.255.255 Specify the IP address of the PBX onthe LAN. Enter the same IP addressthat was input in IP Address forIPCMPR Card (for KX-NCP500/KX-NCP1000/KX-TDE100/KX-TDE200)/IP Address forIPCEMPR Card (for KX-TDE600) of3.4 [1-1] Slot—Card Property -IPCMPR (for KX-NCP500/KX-NCP1000/KX-TDE100/KX-TDE200)/IPCEMPR (forKX-TDE600).It is also possible to search for the IPaddress by clicking Search.Port Number 1–65535 Specify the port number used toaccess the PBX via LAN. Enter thesame port number that was input inMaintenance Port Number of3.4 [1-1] Slot—Card Property -IPCMPR (for KX-NCP500/KX-NCP1000/KX-TDE100/KX-TDE200)/IPCEMPR (forKX-TDE600).2.1.2 Access LevelsThere are three main levels of access to the Maintenance Console: User, Administrator and Installer. Eachlevel has its own Programmer Code, which must be entered to run the Maintenance Console. The allowedformat for each programmer code is as follows:Item LengthUser Level Programmer Code 0 – 16 charactersAdministrator Level Programmer Code 4 – 16 charactersInstaller Level Programmer Code 4 – 16 charactersAccess to menu options within the Maintenance Console is restricted depending on the Programmer Code,and the current software mode (see 2.1.1 Starting Maintenance Console and Software Modes). When amenu option is limited to certain access levels, this is noted in this manual in the initial description of that menuoption, for example:"This option is only available at Installer level."If a sentence like this does not appear under the heading, the menu option is available at all levels.The target users for each access level are as follows:Access Level UserUser For end users22 PC Programming Manual Document Version 2011-102.1.2 Access Levels
