2.5 Tool2.5.1 Tool—SD memory backupSaves system data from the PBX to the SD memory card. Backup begins as soon as this option is chosen.To back up system data• From the Tool menu, select SD memory backup.2.5.2 Tool—NDSS Link Data ClearClears NDSS Link Data stored in the connected PBX. While this tool clears both monitor extension andmonitored extension data, it only clears it at the connected PBX. To clear this data at other PBXs in the network,it is necessary to run this tool at those PBXs.To clear the NDSS Link Data• From the Tool menu, select NDSS Link Data Clear.A confirmation screen will be displayed.• Click OK to clear the data.• Click Cancel to keep the data, and close the screen.2.5.3 Tool—DXDP All OUSSets the status of all DXDP/XDP extension ports to "OUS" simultaneously.To set all DXDP/XDP ports to OUS.1. From the Tool menu, select DXDP All OUS.2. Click OK.2.5.4 Tool—Simplified Voice Message—Delete All RecordingDeletes all voice messages recorded by the SVM feature.To delete voice messages1. From the Tool menu, point to Simplified Voice Message and select Delete All Recording.2. Select the card from which to delete messages.3. Click OK.2.5.5 Tool—Simplified Voice Message—Check Current UsageDisplays information on the voice messages stored by the SVM feature. For each message, the type ofmessage and the associated extension are displayed.To view SVM message status• From the Tool menu, point to Simplified Voice Message and select Check Current Usage.Document Version 2011-10 PC Programming Manual 392.5.5 Tool—Simplified Voice Message—Check Current Usage
