Using Web Maintenance Console in Off-line ModeYou can connect a PC to the PBX to program the PBX using Web Maintenance Console (On-line mode), oryou can program the PBX without connecting the PC to the PBX (Off-line mode).Off-line mode programming is performed using the Off-line version of Web Maintenance Console, which youinstall on your PC. The changes made during Off-line mode are saved as local data on the PC, and then lateruploaded to the PBX.The following procedures outline how to install the Web Maintenance Console for Off-line mode programming.InstallationNote• Be sure to install the latest version of Off-line WEB-Maintenance Console.• Before beginning the installation of Off-line Web Maintenance Console, the following software must beinstalled on the PC:– Microsoft® .NET Framework 2.0– Microsoft .NET Framework 4This software can be downloaded from Microsoft’s online Download Center.• To install or uninstall the software on a PC running Windows Vista® Business, Windows® 7, Windows8, Windows 8 Professional, Windows 8.1, or Windows 8.1 Professional, you must be logged in as auser in the "Administrators" group.1. Copy the Off-line WEB-Maintenance Console setup file to your PC.2. Double-click the setup file to run the installer.3. Follow the on-screen instructions provided by the installation wizard.NoteFor information about programming the PBX in Off-line mode, refer to the PC Programming Manual.Converting KX-TDE or KX-NCP System Data for Use with the KX-NS1000You can use a tool to convert an existing PBX's system data (DxSYS*1) for use in a KX-NS1000 Master unit orSlave unit, and then use that data as the system data (DCSYS) for the KX-NS1000. The following options areavailable as the conversion destination (Master unit or Slave unit) for the data.Conversiontype System data necessary for conversion System configuration forpost-conversion DCSYS fileMaster dataconverterSystem data from an existing PBX(DxSYS*1)Master unit, Stand aloneSlave dataconverterSystem data from an existing PBX(DxSYS*1) that will be added as a slave unit.Master unit with Slave unitsSystem data from a Master unit to be usedas the base.The following figures illustrate the system data conversion process for the conversion types.Document Version 2016-03 Installation Manual 1795.3 Starting Web Maintenance Console
