4.5.2 PRI30/E1 Card (KX-NS5290CE)FunctionA combination card including:• 1 ISDN Primary Rate Interface port (30B channels).EURO-ISDN/ETSI compliant.1 E1 port (30B channels).ITU-T standard compliant.To NT1/ Extension LEDRJ45Accessories and User-supplied ItemsAccessories (included): Spacer ´ 3, slot cover ´ 1User-supplied (not included): RJ45 connector, Twisted pair cableCAUTION• When connecting this optional service card to the trunk, connect through an NT1; do not connect tothe U interface of the trunk directly.• PRI ports are SELV ports and should only be connected to SELV services.Notice• The cable to connect to the ISDN Primary Rate Interface port of the PRI30/E1 card should be CAT 5(Category 5) or higher.Note• You can select PRI30 use or E1 use by Web Maintenance Console.– For switching from PRI30 use to E1 use:Delete the PRI30 card first and select the E1 card in the "PBX Configuration ® Configuration ®Slot" screen of the Web Maintenance Console. To restart the PBX, click Maintenance ® SystemControl ® System Reset.– For switching from E1 use to PRI30 use:Delete the E1 card first and select the PRI30 card in the "PBX Configuration ® Configuration ®Slot" screen of the Web Maintenance Console. To restart the PBX, click Maintenance ® SystemControl ® System Reset.• In some countries/areas, this optional service card must not be connected to the Public SwitchedTelephone Network.• To confirm the trunk connection, refer to "Confirming the Trunk Connection" in "4.13 Starting theKX-NS500".Installation Manual 1194.5.2 PRI30/E1 Card (KX-NS5290CE)
