Setup in WindowsSettings and Printing NetworkNetworkMaintenance and Spec. 8The following is the outline of the steps how to set up LPR Port printing using TCP/IP inWindows 95 / Windows 98 / Windows Me.Step 1: Setting up TCP/IP on the computerStep 2: Setting up TCP/IP for the printerSelect a network printing method before proceeding the step 3.• When printing directly from a computer to the printer, perform steps 3 and 4 oneach computer (Windows 95, Windows 98 or Windows Me).• When printing through the shared computer (server), perform steps 3 to 5 on theserver computer (Windows 95, Windows 98 or Windows Me), then perform step 6 oneach client computer (Windows 95, Windows 98, Windows Me, Windows NT 4.0 orWindows 2000).Step 3: Installing LPR Port on the computerStep 4: Setting up the printer driver and the printer port on the computerStep 5: Sharing the printer port on the server computerStep 6: Setting up the printer driver and the printer port on the client computern Step 1: Setting up TCP/IP on the computerIf the TCP/IP protocol is already installed on your computer and it is configured, proceed to thenext step. If it is not installed, you need to install TCP/IP in the operating system on thecomputer and configure it.If the administrator manages the IP address, contact him/her to confirm the values beforesetting the TCP/IP. Be sure to assign the unique value for the IP address that is not used forthe other devices in the network. Refer to the example of “Using the Network Setup Tool” onpage 9. To confirm that the IP address is set correctly, see page 14.Regarding the configuration of TCP/IP, refer to the help menu or documentation for Windows.LPR Port printing using TCP/IP in Windows 95 / Windows 98 /Windows Me
