AppendixSettings and Printing NetworkNetworkMaintenance and Spec. 122Unables to connect to NetWare Server in Print Server mode.• Make sure the frame type is set correctly.• KX-P7110 can switch to PSERVER and RPRINTER automatically, but it may take extra timedepending on the environment.• If file server is defined to the KX-P7110, make sure the file server name is correct.• Make sure the printer port name is correct. Make sure the same port name is assigned to theKX-P7110 and NetWare server. If there are more than one KX-P7110 on the network, makesure the assigned port name is unique.• Make sure the same NetWare login password is set to the KX-P7110 and the file server.• Make sure the machine name and print server name are the same.Unables to Print.• Make sure that the KX-P7110 is connected to the network correctly.n Trouble in Macintosh EnvironmentUnables to detect KX-P7110.• Make sure that the KX-P7110 is connected to the network correctly.• If the KX-P7110 is on the assigned zone, make sure the zone name is selected from"Chooser" .• Make sure the correct printer driver is selected.• Make sure AppleTalk is checked as Available from the Chooser.• Make sure AppleTalk in the control panel is the same environment as you are using.NOTE• When AppleTalk is selected, make sure EtherTalk is selected.• When Network is selected, make sure EtherTalk is selected.• Print out the Configuration Report and make sure the AppleTalk protocol is set to ENABLE.The setting up can be done using Windows utility, or Macintosh utility.• Print out the Configuration Report and make sure the EtherTalk port name is not assigned.Shows "Not enough Memory" and unables to print.• Application memory may not be enough. Click the application icon, select Information fromfile menu, and increase memory size.• Close any other running applications.• Increase the available space of the hard disk of your computer.
