Panasonic KX-P8415 Setup And Reference Manual

Also see for KX-P8415: Maintenance Guide Settings guide Operating instructions Specifications

11If you do not have a parallel interface cable, you willneed to purchase one (see below) from your localcomputer store or dealer. For detailed information,see page 31 in the Reference Guide.Make sure the computer, printer andthe other connected peripheraldevices are turned off.Connect the parallel interface cable tothe computer’s parallel interfaceconnector and the printer’s one.Notes:BThe actual connector on the computer maydiffer depending on the manufacturer of thecomputer.BIf the cable is connected to the PC via a printerbuffer or selector, the printer may not print.Connect the power cord to theprinter’s AC inlet and to an AC outlet.The printer is shipped with a media tray (Letterpaper or A4 paper) installed. Besides them,transparency or legal paper tray can be used.To usethese media trays, see page 18 on the ReferenceGuide or “Settings and Printing” on the KX-P8415CD-ROM.Available media:*1Recommended paper is as follows:Letter/Legal: Hammermill LASERPRINT 90 g/m2(24 lbs.)A4: 4CC 80 g/m 2Caution:BDo not use a media for ink jet that may bewrapped around the fuser roller and causedamage.Pull the media tray out of the printer.Remove all packing materials frominside the media tray; refer to theinstruction sheet attached to the tray.Connecting the Printer to aComputer23Computer’sparallel interfaceconnectorCableConnector Type IEEE 1284-B type connectorUse a shielded cable 2.0 m(6.6 ft) or less in length.1Loading Media in the MediaTray12Media ThicknessLaser paper* 1 B&W: 60 to 105 g/m 2(16 to 28 lbs.)Color: 75 to 105 g/m2(20 to 28 lbs.)SetupSetup Guide