3.00 Fixed Error MessagesDATA ERROR No. Probable Cause Countermeasure003 Unacceptable value is assigned. Assign an allowable value.004 Space exists between items. Remove the space.005 Some items are left blank. Assign all required items, or leave all itemsblank.006 At least one blank should be left among multiple Leave at least one blank.items.007008009012013016Assigned selection value is not for the item, Set the assignable value.The number which is set previously in this Set the number different from the previousscreen is assigned again. number.The number which is set previously in a different Set the number different from the previousscreen is assigned. number.Device is not installed. Assign the installed device.Status of the specified device does not accept Change the.status of the device to bethis command. acceptable for the command.Privilege level is lower than specified level. Increase the privilege level through theChange level function.0 1 7 Diagnostic error has been detected when INS Verify the related device.command is executed.018019020Specified service is not executed.Another maintenance device (remote, PITS,system) is in use.Printer is not connected to the system or thepower is off.Check specified service.Wait until another device is finished or let himfinish.Connect the printer, and make the power on.0 2 1022023Print out is unavailable from Remote. Execute print out on-site.Entered parameters for Item or Index ia out of Enter the parameters within the specifiedthe spepified range. range.‘,I” or l , &I+ ” is entered in BT (Batch) Correct the wrong entry.programming.024027Calendar IC malfunction.Backup device is not connec$ed (only whenmaintenance device is ATT).Repair calender IC.Connect the backup device to SIO # 1 Port.029 Diierent version at the time of backup. Match the backup version.10-D-6(21292)