Contents - Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- General Features
- Account Code Entry
- Alternate Calling — Ring / Voice
- Answering, Direct Outside Line
- Automatic Callback Busy (Camp-On)
- Automatic Configuration
- Automatic Hold by CO Button
- Automatic Station Release
- Background Music (BGM)
- Background Music (BGM) — External
- Busy Lamp Field
- Busy Station Signaling (BSS)
- Button, Direct Station Selection (DSS)
- Button, Flexible
- Button, Group-CO (G-CO)
- Button, Loop-CO (L-CO)
- Button, Single-CO (S-CO)
- Buttons on Proprietary Telephones
- CALL FORWARDING FEATURES — SUMMARY
- Call Hold — Intercom
- Call Hold — Outside Line
- Call Hold Retrieve — Intercom
- Call Hold, Exclusive — Intercom
- Call Hold, Exclusive — Outside Line
- Call Log, Incoming
- Call Park
- Call Pickup Deny
- Call Pickup, Directed
- Call Pickup, Group
- Call Pickup, Outside Line
- Call Splitting
- CALL TRANSFER FEATURES — SUMMARY
- Call Waiting
- Call Waiting from Central Office
- Caller ID
- Caller ID Call Waiting
- Calling Party Control (CPC) Signal Detection
- Camp-On Transfer to Phantom Extension / Ring Group
- Class of Service (COS)
- Conference
- Conference, Unattended
- Confirmation Tone
- Consultation Hold
- Data Line Security
- Dial Tone, Distinctive
- Dial Type Selection
- Direct In Lines (DIL)
- Direct Inward System Access (DISA)
- Display, Call Information
- Display, in Idle
- Display, Self-Extension Number
- Do Not Disturb (DND)
- Do Not Disturb (DND) Override
- Door Opener
- Doorbell/Door Chime (user-supplied)
- Doorphone Call
- DSS Console
- Electronic Station Lockout
- Emergency Call
- End-to-End DTMF Signaling (Tone Through)
- Executive Busy Override — Extension
- Executive Busy Override — Outside Line
- Extension Group
- External Feature Access
- Flash
- Flexible Numbering
- Floating Station
- Full One-Touch Dialing
- Handsfree Answerback
- Handsfree Operation
- Hold Recall
- Host PBX Access
- Intercept Routing
- Intercom Calling
- LED Indication, Intercom
- LED Indication, Outside Line
- Limited Call Duration
- Line Access, Automatic
- Line Access, Direct
- Line Access, Individual
- Line Access, Outside Line Group
- Line Preference — Incoming (No Line / Prime Line / Ringing Line)
- Line Preference — Outgoing (Idle Line / No Line / Prime Line)
- Live Call Screening (LCS)
- Lockout
- Log-In / Log-Out
- Lunch / Break Service
- Manager Extension
- Message Waiting
- Microphone Mute
- Mixed Station Capacities
- Module Expansion
- Music on Hold
- Night Service
- One-Touch Dialing
- One-Touch Transfer by DSS Button
- Operator
- Operator Call
- Outgoing Message (OGM)
- Outside Line Connection Assignment
- Outside Line Connection Assignment — Outgoing
- Outside Line Group
- PAGING FEATURES — SUMMARY
- Paralleled Telephone
- Pause Insertion, Automatic
- Personal Speed Dialing
- Phantom Extension
- Pickup Dialing
- Power Failure Restart
- Power Failure Transfer
- Privacy Release
- Privacy, Automatic
- Pulse to Tone Conversion
- Quick Dialing
- Redial, Last Number
- Redial, Saved Number
- Remote Station Lock Control
- Ring Group
- Ringing, Delayed
- Ringing, Discriminating
- Room Monitor
- Secret Dialing
- Station Hunting
- Station Message Detail Recording (SMDR)
- Station Program Clear
- Station Programming
- Station Programming Data Default Set
- System Data Default Set
- System Programming with Proprietary Telephone
- System Speed Dialing
- System Working Report
- Time-Out, Variable
- Timed Reminder
- Timed Reminder, Remote (Wake-Up Call)
- Toll Restriction
- Toll Restriction for Special Carrier Access
- Toll Restriction Override by Account Code Entry
- Toll Restriction Override for System Speed Dialing
- Trunk (Outside Line) Answer From Any Station (TAFAS)
- Two-Way Recording into Voice Mail
- User Programming (Manager Programming)
- Voice Mail Integration
- Voice Mail Integration (DPT Integration)
- Volume Control — Speaker / Handset Receiver / Headset / Ringer
- Walking COS
- Tone / Ring Tone
- Index
|
General Features160 Features GuidePhantom ExtensionDescriptionAllows the system to route calls to a phantom extension. A call to a phantom extension is sentto extensions that have the corresponding Phantom Extension button. A Phantom Extensionbutton can be assigned by Station Programming.Conditions• Types of calls whose destination can be the phantom extension are:Outside calls —Direct In Lines (DIL) 1:1;Direct Inward System Access (DISA);Intercept Routing — No Answer (IRNA);Intercom calls —Extension; Transfer• You can call the phantom extension by pressing the Phantom Extension button or by dialingthe phantom extension number. If several extensions have the same phantom extensionnumber, they will ring simultaneously.• A phantom number must be assigned by System Programming before assigning thePhantom Extension button by Station Programming.• There is a maximum of 128 phantom numbers. Each number has two to four digits,consisting of numbers 0 through 9.• The phantom number cannot be used for feature settings such as Call Forwarding.• The lighting patterns and statuses of the Phantom Extension button are shown below.• A DSS (Direct Station Selection) button can be assigned as the Phantom Extension buttonso that the operator can use the button for transferring a call.• Whether or not the extension will ring when a call is received at a phantom extension isprogrammable.Programming Guide References• [124] Phantom Extension Number AssignmentFeatures Guide ReferencesNoneLighting pattern Phantom Extension StatusOff IdleRed on Calling a phantom extensionFlashing green rapidly Incoming call
|
