1.1 General Features126 Feature Manual• When a dialed telephone number matches one of the Automatic Pause Insertion codes assignedthrough system programming ( [311] Automatic Pause Insertion Code), a pause will be automaticallyinserted after the code. This is particularly convenient if a second dial tone is sent from your telephonecompany.• This feature functions for Speed Dialing, One-touch Dialing, Last Number Redial, Saved NumberRedial, Hot Line, and Call Forwarding—To Outside (CO) Line, as well as for normal calls.Programming Manual References[PT Programming][311] Automatic Pause Insertion Code[403] Host PBX Access Code[417] Pause Time[PC Programming]9.1.10 Automatic Pause Insertion Codes [1-9]9.3.3 Detail [3-3]—Host PBX Access Codes, Pause TimeFeature Manual References1.1.65 Host PBX Access Code (Access Code to the Telephone Company from a Host PBX)1.1.117 Toll Restriction (TRS)1.1.99 PC ProgrammingDescriptionSystem programming settings can be accessed using a PC and the Panasonic KX-TA Maintenance Consolesoftware as well as by using a proprietary telephone (PT) ( 1.1.103 PT Programming). Systemprogramming and data upload/download can be performed either through on-site programming or remoteprogramming.1. On-site Programming: Programming that is performed using an on-site PC connected directly tothe PBX.2. Remote Programming: Programming that is performed using an off-site PC that connects to thePBX via an outside (CO) line.1. Connection Methods for On-site ProgrammingMethod Description RequiredHardwareSerial Interface(RS-232C port)The PC is connected to the PBX via the Serial Interface (RS-232C port) of the PBX.—USB The PC is connected to the PBX via the USB port of the PBX. —
