1.1 General Features34 Feature Manual[904] Caller ID Log Priority[906] Caller ID SMDR Format[907] Caller ID SMDR Printout[909] Common Area Call Log Check[913] Call Waiting Caller ID Assignment[PC Programming]9.9.1 Main [9-1]—CO Line Settings—Caller ID, CO Line Settings—Call Waiting Caller ID, Caller IDModification—Local Area Code (for Local Call 1–5), Caller ID Modification—Removed Digits, Caller IDModification—Added Number, Caller ID SMDR Format, Caller ID SMDR Printout9.9.3 Call Log [9-3]Feature Manual References1.1.8 Built-in Voice Message (BV)1.1.30 Caller ID1.1.55 Extension Lock1.1.61 Flexible Buttons1.1.82 Message Waiting2.1.1 Capacity of System ResourcesOperating Manual References1.3.18 Call Log, Incoming1.3.19 Call Log Display Lock, Incoming in the Personal Area2.1.1 Call Log, Incoming in the Common Area—CLEAR ALL2.1.2 Call Log Display Lock, Incoming in the Common Area2.1.6 Remote Extension Lock2.1.7 System Feature Assignment—Extension Lock—CANCEL ALL2.1.8 The 301st Call Log, Incoming in the Common Area Treatment3.1.3 Flexible Button Assignment—Caller ID Indication—Personal/Common or Caller ID Selection—Personal/Common button1.1.19 Call ParkDescriptionAn extension user can hold a call by placing it into a common parking zone of the PBX. A parked call canbe retrieved by any extension user. This feature is useful when an extension user wants to hold more thanone intercom call with a proprietary telephone (PT), or more than one intercom call or outside (CO) line callwith a single line telephone (SLT).Conditions• Call Park RecallIf a parked call is not retrieved within a preprogrammed time period ( [200] Hold Recall Time), a ringtone will be heard at the extension that parked the call. If the destination is engaged in a call when thetimer expires, an alarm tone will be heard.
