21Useful Telephone Settings3 Press {v} repeatedly to display “CALLOPT”, then press {>}.4 Press {v} repeatedly to display “SETDIRECT”, then press {>}.5 Press {v} repeatedly to select “ON” or“OFF”, then press {>}.6 Press {ih}.Other optionsChanging the handset PIN (PersonalIdentification Number)The handset’s default PIN is “0000”.Important:L If you change the PIN, please write downyour new PIN as the unit will not reveal thePIN to you. If you forget your PIN, consultyour nearest Panasonic service centre.1 Press {j}.2 Press {v} repeatedly to display“SETTING HS”, then press {>}.3 Press {v} repeatedly to display “OTHEROPT”, then press {>}.4 Press {v} repeatedly to display “HSPINCHANGE”, then press {>}.5 Enter the current 4-digit handset PIN.6 Enter the new 4-digit handset PIN.7 Enter the new 4-digit handset PIN again.8 Press {ih}.Setting auto talkThis feature allows you to answer callssimply by lifting the handset off the baseunit. You do not need to press {C}.1 Press {j}.2 Press {v} repeatedly to display“SETTING HS”, then press {>}.3 Press {v} repeatedly to display “OTHEROPT”, then press {>}.4 Press {v} repeatedly to display “AUTOTALK”, then press {>}.5 Press {v} repeatedly to select “ON” or“OFF”, then press {>}.6 Press {ih}.Setting the battery type“NI-MH”: Select when nickel metal hydridebatteries are installed.“NI-CD”: Select when nickel cadmiumbatteries are installed.1 Press {j}.2 Press {v} repeatedly to display“SETTING HS”, then press {>}.3 Press {v} repeatedly to display “OTHEROPT”, then press {>}.4 Press {v} repeatedly to display“BATTERY TYPE”, then press {>}.5 Press {v} repeatedly to select thedesired setting, then press {>}.6 Press {ih}.Resetting the handset to its defaultsettings1 Press {j}, {v}, {>}, {e} and {>}.2 Enter “0000” (default handset PIN).L If you changed PIN, enter it (page 21).3 Press {v}, {>} and {ih}.Note:L For the default settings, see page 17.L Phonebook entries will not be erased.L The battery type setting will not be reset.TCD430AL(E).book Page 21 Tuesday, March 30, 2004 5:27 PM