Panasonic KX-TCD430AL Operating Instructions Manual

22Useful Telephone SettingsGuide to base unitsettingsFor your reference, a chart of all items whichcan be customised for the base unit isprinted below. Details of each item can befound on the corresponding pages.*1 If you cancel a handset, the base unit will“forget” the handset registration.Base unit settingsChanging base unit PIN (PersonalIdentification Number)The base unit’s default PIN is “0000”.Important:L If you change the PIN, please write downyour new PIN as the unit will not reveal thePIN to you. If you forget your PIN, consultyour nearest Panasonic service centre.1 Press {j}.2 Press {v} repeatedly to display“SETTING BS”, then press {>}.3 Press {5}.4 Enter the current 4-digit base unit PIN.5 Enter the new 4-digit base unit PIN.6 Enter the new 4-digit base unit PIN again.7 Press {ih}.Adjusting ringer volume4 levels (high/medium/low/off) are available.1 Press {j}.2 Press {v} repeatedly to display“SETTING BS”, then press {>}.3 Press {2} 2 times.4 Select the desired setting by pressing {1}for low, {2} for medium, {3} for high or{0} for off.5 Press {>}, then press {ih}.Setting recall timeChange the recall time if necessary to suityour PBX or service provider. For furtherinformation, consult your nearest Panasonicservice centre.1 Press {j}.2 Press {v} repeatedly to display“SETTING BS”, then press {>}.3 Press {3}.4 Enter “0000” (default base unit PIN).L If you changed PIN, enter it (page 22).5 Press {2}.6 Press {1}.CodeNo.Feature(Default setting)Page{0} Reset base unit page24{1} Set all or selectedhandsets to ring (Allhandsets ring)page27{2} Base unit ringervolume (Medium)page22{3} Recall time (100 ms) page22Pause length (3seconds)page23{5} Change base unitPIN (“0000”)page22{6} Call restriction page23Emergency number(“000” and “106”)page24{7} Cancel a handset*1 page26{*} Time and date page10TCD430AL(E).book Page 22 Tuesday, March 30, 2004 5:27 PM