4-260 Station Features and Operation4.5 Special Display FeaturesSystem Feature Access MenuYou can access various features using the messages which are displayed inalphabetical order.To access the features, press the Feature (F4) button on the initial display first, searchfor the desired feature message by pressing the NEXT (S3) button. Then press theFunction button which is next to the message. Additional parameters may be required.To access the features while receiving a call (e.g. ringing), press the INTERCOM/DNbutton first. Then follow the procedures on the following pages.Features on the First DisplayFirst DisplayPREV NEXTMENUAbsent MSG OffAbsent MSG On (→1-9)BSY Out Cancel (→PHY)BSY Out Confirm (→PHY)BSY Out Set (→PHY)See the next page.RING BGMCONTExtension STA SpeedFeatures SYS SpeedCall LogAbsent MessageCapabilityShows your message onthe calling party’s display.On-hook.Dial messagenumber (1 through 9).Enter the parameters,if required.On-hook.Cancel SetTrunk Busy-outSetting(operator/manager only)Refer to thecorresponding featurein Section 4.4,“Operator / ManagerService Features”.
