2.3 Connect48 PC Programming Manual2.3.5 Connect—ISDN RemoteConnects to the PBX in Interactive mode using the ISDN TA interface of the PBX.This method is only available when a user-supplied ISDN TA that supports CAPI 2.0 is used, andRemote—ISDN Remote Floating Extension Number of the 2.17.1 [11-1] Main screen is set.This option allows direct entry of connection parameters, for cases where the PC is used to connectto one or just a few PBXs, and an individual profile for each PBX is not necessary. If you connect tomultiple PBXs and would prefer to choose from among pre-saved profiles instead, see 2.4.13 Tool—Profile Setup for more details about creating profiles.To connect to the PBX by ISDN Remote1. From the Connect menu, select ISDN Remote.The Login window will be displayed.2. Select a connection option.• Select the Use profile check box if you want to use a pre-saved profile.a. Select the profile to use from the drop-down list.The Setup button will become unavailable.b. If the system password for the PBX has not been stored with the profile, enter it.If the system password has been stored with the selected profile, it does not need to beentered.• Confirm that the ISDN Remote radio button is selected if you want to enter parametersmanually.a. Click Setup.b. Modify the connection parameters as required. For more details, see the table below.c. Click OK.3. Click OK.Connection Setting for ISDN RemoteSetting Values ExplanationDial Number 30 digits (consisting of1-9, 0, *, # and ","[comma])Enter the telephone number to be dialled toaccess the PBX.
