2.12 [6] Feature698 PC Programming Manual2.12 [6] Feature2.12.1 [6-1] System Speed DialThe System Speed Dialling Table is used to store frequently dialled numbers as well as callers whoshould be automatically routed to certain extensions when they call (Calling Line Identification [CLI]distribution). The System Speed Dialling Table is available for all extension users when making orreceiving a call.A maximum of 1000 System Speed Dialling numbers (e.g., telephone numbers, feature numbers) canbe programmed with other related parameters. 100 numbers are displayed at a time. To display othersets of numbers, click the applicable tab.MemorySelects the System Speed Dialling Table to be programmed. Whether a tenant uses the basic SystemSpeed Dialling Table or the additional table (with MEC [KX-TDA30/KX-TDA100/KX-TDA200] orEMEC [KX-TDA600] card) depends on the setting of System Speed Dial in 2.12.6 [6-6] Tenant.Value RangeFor KX-TDA30:Basic Memory: the standard tableExpanded Memory: additional table (only available when an MEC card is installed to the PBX)For KX-TDA100/KX-TDA200/KX-TDA600:Basic Memory: the standard tableExpanded Memory for Tenant 1–8: additional tables (only available when an MEC/EMEC card isinstalled to the PBX)Maintenance Console Location2.12.1 [6-1] System Speed DialProgramming Manual References2.12.6 [6-6] Tenant—System Speed DialFeature Guide References1.6.1.5 Speed Dialling—Personal/System1.18.1 Caller ID2.2.3 Tenant ServiceNameSpecifies a name for the System Speed Dialling number.Value RangeMax. 20 charactersMaintenance Console Location2.12.1 [6-1] System Speed Dial
