1.10 Conversation FeaturesFeature Guide 831.10.6 Flash/RecallDescriptionA proprietary telephone (PT) user can use the FLASH/RECALL button to disconnect the current call andstart another call without hanging up. For example, if this button is used to disconnect an outside (CO) line,the extension user will hear a new dial tone from the same outside (CO) line.Conditions• FLASH/RECALL Button ModeOne of the following modes can be selected through system programming ( Flash/Recall Key Mode[110]):a) MODE 1: EFA mode ( 1.10.7 External Feature Access (EFA))An EFA signal is sent for the specified duration ( Flash/Recall Time [418]).b) MODE 2: Flash/Recall modeA flash/recall signal is sent for the FLASH/RECALL button is pressed if the length of time that thebutton is pressed is longer than the specified duration ( Flash/Recall Time [418]). If the lengthof time that the button is pressed is shorter than the specified duration, an EFA signal will be sentfor the specified duration.• This feature functions only if the FLASH/RECALL button is set to "MODE 2: Flash/Recall mode".• Disconnect TimeThe amount of time between successive accesses to the same outside (CO) line is programmable foreach outside (CO) line ( Disconnect Time [422]).• This feature generates an SMDR call record ( 1.20.1 Station Message Detail Recording (SMDR))and restarts the call timer. The notation "F/" will be logged along with the new dial number.
