Panasonic KX-TG1105RUS Service Manual

Contents

24 EEPROM LAYOUT (HANDSET)24.1. ScopeThe purpose of this section is to describe the layout of the EEPROM (IC2) for the KX-TGA110 Handset.The EEPROM contains hardware, software, and user specific parameters. Some parameters are set during production of thehandset e.g. crystal oscillator adjustment at 0000..01, some are set by the user when configuring the handset e.g. ringer volumeat 0F3E, and some during normal use of the phone.24.2. IntroductionThe handset uses a 32 k bit serial EEPROM (IC2) for storing volatile parameters. All parameters are set up before the handsetthe factory. Some of these are vital for the operation of the hardware so a set of default parameters is programmed before theactual hardware fine-tuning can be initiated. This document lists all default settings with a short description.This document lists all default parameters with a short description.In the tables below values in a range that are similar are not repeated; i.e. Address 00 to 01 contains the value 00 simply meansthat the value 00 is repeated in all addresses in the range.Type Name DescriptionD default The EEPROM location is preset to the Default value by the eeprom default loader.A adjust The EEPROM location is set during the production test and should not be overwritten. The value is set by theeeprom default loader only if the location contains 0xFF, i, e. it has never been set.- EEPROM location which is not set at all.CountrySettingx Default - no specific country setting, so revert to default value24.3. EEPROM contents24.3.1. General SetupAddress Default Name CountrySettingType Description0000-0001 00 60 EepromOscillator - A Frequency adjustment0002 0A ModulationDeviation - A Modulation adjustment0030-0034 00 IPEI (ID for Handset) - A IPEI0036-003A FF .. FF PARK_1 (ID for Base 1) - - PARK for registration 1003B-003F FF .. FF PARK_2 (ID for Base 2) - D PARK for registration 20040-0044 FF .. FF PARK_3 (ID for Base 3) - D PARK for registration 30045-0049 FF .. FF PARK_4 (ID for Base 4) - D PARK for registration 4004A-004D FF .. FF PLI_1-PLI_4 - D Pli for registration 1-4. If set to FF theregistration is deleted.0100-0104 - RFPI_1 (Base 1) - - RFPI for registration 10105 - SerClass_1 - - Service class for registration 10106 - LAL_1 - - Location area level for registration 10107 - IPUI_LEN_1 - - IPUI length for registration 10108-0114 - IPUI_1 - - IPUI for registration 10115 - ZAP_1 - - ZAP for registration 10116 - STATUS_1 - - Status for registration 10117-126 - UAK_1 - - UAK for registration 10130-134 FF .. FF RFPI_2 (Base 2) - D RFPI for registration 20135 FF SerClass_2 - D Service class for registration 20136 FF LAL_2 - D Location area level for registration 20137 FF IPUI_LEN_2 - D IPUI length for registration 20138-0144 FF .. FF IPUI_2 - D IPUI for registration 20145 FF ZAP_2 - D ZAP for registration 20146 FF STATUS_2 - D Status for registration 20147-0156 FF .. FF UAK_2 - D UAK for registration 20160-0164 FF .. FF RFPI_3 (Base 3) - D RFPI for registration 30165 FF SerClass_3 - D Service class for registration 30166 FF LAL_3 - D Location area level for registration 30167 FF IPUI_LEN_3 - D IPUI length for registration 30168-0174 FF .. FF IPUI_3 - D IPUI for registration 30175 FF ZAP_3 - D ZAP for registration 30176 FF STATUS_3 - D status for registration 30177-0186 FF .. FF UAK_3 - D UAK for registration 30190-0194 FF .. FF RFPI_4 (Base 4) - D RFPI for registration 40195 FF SerClass_4 - D Service class for registration 461KX-TG1105RUS / KX-TG1105RUT / KX-TG1106RUS / KX-TG1106RUT / KX-TGA110RUS / KX-TGA110RUT