Panasonic KX-TG1221 Operating Instructions Manual

Panasonic KX-TG1221 Operating Instructions Manual Manual pdf 13 page image

Making/Answering Calls13For assistance, please visit http://www.panasonic.com/helpMaking calls1 Lift the handset and dial the phonenumber.L To correct a digit, press {CLEAR}.2 Press {C}.3 When you finish talking, press {OFF} orplace the handset on the base unit orcharger.Using the speakerphone1 Dial the phone number and press {s}.L Speak alternately with the other party.2 When you finish talking, press {OFF}.Note:L For best performance, use thespeakerphone in a quiet environment.L To switch back to the receiver, press{s}/{C}.Adjusting the receiver or speakervolumePress {^} or {V} repeatedly while talking.Making a call using the redial listThe last 5 phone numbers dialed are stored inthe redial list (each 48 digits max.).1 {>} REDIAL2 {r}: Select the desired phone number.3 {C}Erasing a number in the redial list1 {>} REDIAL2 {r}: Select the desired phone number.s {CLEAR}3 {r}: “Yes” s {OK}4 {OFF}Pause (for PBX/long distance serviceusers)A pause is sometimes required when makingcalls using a PBX or long distance service.When storing a calling card access numberand/or PIN in the phonebook, a pause is alsoneeded (page 17).Example: If you need to dial the line accessnumber “9” when making outside calls with aPBX:1 9 s {PAUSE}2 Dial the phone number. s {C}Note:L A 3.5 second pause is inserted each time{PAUSE} is pressed. Repeat as needed tocreate longer pauses.Answering calls1 Lift the handset and press {C} or {s}when the unit rings.L You can also answer the call bypressing any dial key from ) to 9, *,or (. (Any key answer feature)2 When you finish talking, press {OFF} orplace the handset on the base unit orcharger.Auto talkYou can answer calls simply by lifting thehandset off the base unit or charger. You donot need to press {C}. To turn this feature on,see page 19.Adjusting the handset ringer volume■ While the handset is ringing for anincoming call:Press {^} or {V} repeatedly to select thedesired volume.■ Programming the volume beforehand:1 {MENU}2 {r}: “Initial setting” s {OK}3 {r}: “Ringer settings” s {OK}4 {r}: “Ringer volume” s {OK}5 {r}: Select the desired volume.6 {OK} s {OFF}TG122x.book Page 13 Wednesday, September 29, 2010 2:13 PM