Using the Caller ListBasic Operation25Storing Caller Information in the Phone BookCallers’ names and phone numbers that are in the Caller List can be stored in thephone book.• If the handset beeps 3 times and “Phone book full” is displayed in step 4,press [OFF] to exit the list. To erase other stored items from the phone book, seepage 30.• You cannot store caller information in the phone book if a phone number is notdisplayed.• If the handset beeps 3 times and “Save error” is displayed in step 4, the itemcannot be stored in the phone book. Place the handset on the base unit and tryagain from step 1.1 Press Rcvd calls to enter the Caller List.• You can also enter by pressing [ ] or [ ].2 Scroll to the desired caller by pressing [ ] or[ ].• If the number requires editing, see page 24.• Name and phone number are alternatelydisplayed as shown on the right.3 Press Select.4 Press Save.• To continue storing other items, repeat fromstep 2.If there is no name information for thecaller, “Enter name” will be displayed.a) If a name is not required, press [ ] thenpress Save.b) If a name is required, enter the name (p. 28).When finished, press [ ] then press Save.• To continue storing other items, repeat fromstep 2.5 Press [OFF].>> 2 missed callsRcvd Phonecalls book2 missed calls=Scroll list>>>> TURNER,CINDY11:00A JAN.12 X3Erase Select555-456-789011:00A JAN.12 X3Erase Select>>TURNER,CINDY555-456-7890Edit SaveEnter name=Next>CINDY TURNER=Next>R