Advanced Operation31Voice Mail ServiceVoice mail service is an electronic on-line answering system offered by yourtelephone company. After subscribing, the voice mail system can answer callsautomatically for you when your line is busy or if calls are not answered, and callerscan leave their messages in your voice mail box virtually located at the telephonecompany. After the voice mail box has received messages, “Voice Mail” will bedisplayed on the handset and the VM (Voice Mail) indicator on the base unit willflash.To use this feature, you must first store your voice mail access number.Storing a Voice Mail Access NumberTo erase a stored voice mail access numberRepeat steps 1 to 4, then press and hold until all of the digits are erased.Press [MENU], then press [OFF].1 Press [MENU].2 Scroll to “Initial setting” by pressing [ ]or [ ], then press Select.3 Scroll to “Voice Mail” by pressing [ ] or[ ], then press Select.4 Press Select at “Store VM access#”.5 Enter your access number, up to 32 digits.• Each time you press , a digit is erased.To erase all of the digits, press and hold .• If a pause is required for dialing, press P*.6 Press [MENU] to save your setting, then press[OFF].*For quick access to your voice mail box, you may add pauses between yourvoice mail box access number and your mail box password in step 5.e.g. 222-333-4444 PPPP 8888Pressing P once creates a 3.5 second delay and counts as one digit. The delaytime depends on your telephone company.>> Initial settingExit Select>>>> Voice MailBack Select>>Store VM access#Back Select>> 1234567PPP890MENU=Save PExamplePausesYour mail boxpasswordYour voice mail box access number