24Making CallsTo adjust the receiver/speaker volume while talking3 levels (HIGH, MEDIUM and LOW) are available for the receiver and 6 levels forthe speaker.To increase volume, press [ ].To decrease volume, press [ ].• The display shows the current volume setting.• If you try to increase/decrease volume when it is atthe maximum/minimum level, the handset will beep3 times.Backlit LCD displayThe lighted display of the handset will stay on for a few seconds after pressing abutton or lifting the handset off the base unit.Lighted handset keypadThe handset dialing buttons will light when you press a button or lift the handset offthe base unit. The light will go out after a few seconds.Answering CallsWhen a call is received, the unit rings and “Incoming call” is displayed, and theRinger indicator on the handset and the IN USE/CHARGE indicator on the baseunit flash rapidly. If you subscribe to a Call Display service, see page 25.• When the ringer volume is set to OFF, the unit will not ring (p. 17).1 Press [ ] or [ ].• You can also answer a call by pressingany button except [ ], [ ] and [OFF].2 To hang up, press [OFF] or place thehandset on the base unit.Auto Talk:If you set the Auto Talk feature to ON (p. 16),you can answer a call by lifting the handset offthe base unit.e.g. Receiver volume: HIGHSpeaker volume: level 6VolumeLow HighCH Hold> >Handset>>[OFF][ ][ ]RingerIndicator✷✸✸✿✤✦✪✦✤✮ ❃ ✥✧