35Cordless TelephoneIntercomA 2-way intercom can be set up between the base unit and the handset.Paging the base unit from the handsetPaging the handset from the base unit (Handset locator)Using this feature, you can also locate the misplaced handset.• If you do not want to answer the page in step 2, press [OFF] to stop paging.1 Handset:Press [MENU].2 Handset:Scroll to “Intercom” by pressing [ ] or [ ], then press Select.3 Base unit:When the other party’s voice is heard after the beeps, answer using theMIC.• The IN USE/CHARGE indicator lights.4 To disconnect the intercom, press [OFF] on the handset.ORPress [LOCATOR/INTERCOM] on the base unit.• The IN USE/CHARGE indicator goes out.1 Base unit:Press [LOCATOR/INTERCOM].• The handset beeps for 1 minute and displays “Paging”.• The Ringer and IN USE/CHARGE indicators flash.• To stop paging, press [LOCATOR/INTERCOM] on the base unit.2 Handset:Press Intercom to answer.• The handset displays “Intercom”.3 Base unit:Speak into the MIC.4 To disconnect the intercom, press [OFF] on the handset.ORPress [LOCATOR/INTERCOM] on the base unit.• The IN USE/CHARGE indicator goes out.During an intercom call:• If the handset user has difficulty hearing the base unit user, decrease the baseunit speaker volume by pressing VOL. [ ].• If noise interferes with the conversation, press CH while “CH” is shown on thehandset display. The unit selects a clearer channel.• If an incoming call is being received, the intercom call stops and the unit startsto ring. To answer, press [ ] or [ ].Handset Base Unit>>>✷✸✸✿✤✦✪✦✤✮ ❃ ✦"