13PreparationFor assistance, please call: 1-800-211-PANA(7262)Useful information:•“---------------” indicates the beginning or the end of the function menu.•You can go back to the previous display by pressing Ü except when enteringcharacters or numbers. To return to the main menu from the sub-menu I or sub-menu II, press Ü.•You can exit the programming mode any time by pressing (OFF).•If you do not press any buttons for 60 seconds, the handset will exit theprogramming mode.•If the unit detects a problem, an error message will be displayed (p. 56).•If you program the dialing mode, the flash time, the line mode or the voice mailfeature using one of the handsets, you will not need to program the samefunction using the other handsets.Function Menu TableYou can use the following functions to customize your unit. After pressing(MUTE/FUNCTION), the main menu is displayed. Most items in the mainmenu have a sub-menu I. The sub-menu I is shown after selecting theitem in the main menu. If the sub-menu I item has the sub-menu II, it willbe displayed after selecting that sub-menu I item. See the correspondingpages for function details.Save directory p. 33Ringer settingInitial setp. 17p. 49Ringer volumeRinger tonep. 18LCD contrastp. 16Auto talkp. 29Caller ID editSet tel lineHS registerp. 14Set dial modep. 48Set flash timep. 15Set line modeVoice mail p. 44VM tone detectp. 43Save VM acces#p. 55Registrationp. 54DeregistrationMain menu Sub-menu I Sub-menu IIp. 45V.M. accessp. 49Incoming call