*7 If you subscribe to a Caller ID service and want to view the caller’s information after lifting upthe handset to answer a call, turn off this feature.*8 If you do not want the unit to ring before the caller information is received, set to “Off”.(Caller ID subscribers only)You can only remove the first ring if the unit rings two times or more by default, whichdepends on your service provider/telephone company.*9 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBXsupplier if necessary.*10 To prevent other users from joining your conversations with outside callers, turn this featureon.Special programmingAlarmAn alarm sounds at the set time for 3 minutesonce or daily. Alarm can be set for eachhandset.Important:R Set the date and time beforehand(page 15).1 M N2 MbN: “Handset Setup” a M N3 MbN: “Alarm” a M N4 MbN: Select the desired alarm option. aM N“Off”Turns alarm off. Go to step 8.“Once”An alarm sounds once at the set time.“Daily”An alarm sounds daily at the set time.Go to step 6.5 Enter the desired date and month.6 Set the desired time. a M N7 MbN: Select the desired alarm tone. aM NR We recommend selecting a differentringer tone from the one used foroutside calls.8 M N a M NR When the alarm is set, is displayed.Note:R To stop the alarm, lift the handset andpress M N or place the handset on thebase unit or charger.R When the handset is in use, the alarm willnot sound until the handset is in standbymode.Increasing the range of the baseunitYou can increase the signal range of the baseunit by using a DECT repeater. Please useonly the Panasonic DECT repeater noted onpage 4. Contact your Panasonic dealer fordetails.Important:R Before registering the repeater to this baseunit, you must turn the repeater mode on.R Do not use more than one repeater at atime.Setting the repeater mode1 M N2 MbN: “Base Unit Setup” a M N3 MbN: “Repeater Mode” a M N4 MbN: Select the desired setting. aM N a M NNote:R After turning the repeater mode on or off,may flash on the handset momentarily.22 Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333Programming