Panasonic KX-TG2970B Operating Instructions Manual

Contents

Panasonic KX-TG2970B Operating Instructions Manual Manual pdf 18 page image

Programmable Settings18Date and TimeWe recommend you set the date and time so that the unit will announce the dayand time each message was recorded when you play back messages.• When entering the time, you cannot enter numbers greater than 12. Do not usemilitary time. (To set 13:00 hours, enter “0100”, and select “PM” .)1 Press [FUNCTION/EDIT].2 Press [ ] at “Telephone”.3 Scroll to “Date and time” by pressing [ ]or [ ], then press [ ].4 (1) Enter 2 digits each for the month, day andyear. (Ex. To set May 15, 2004, enter “0515 04”.)(2) Enter 4 digits for the time (hour andminute). (Ex. To set 9:30, enter “0930”.)• If you enter a wrong number, press [ ] or [ ] tomove the cursor to the incorrect number. Enterthe correct number.5 Select “AM” or “PM” by pressing [ ].6 Press [ ] (Save).• If a long beep sounds, the setting is not correct. Start again from step 4.• The clock starts working.7 Press [STOP].The date and time may be incorrect after a power failure. When “ ” flashes onthe base unit display, set the date and time again.For Caller ID service users (p. 33)• When a call is received, Caller ID information adjusts the date and time if thetime is incorrect.• Caller ID information will automatically adjust the date and time for daylightsaving time.• If the date and time have not been previously set, Caller ID information will notadjust the date and time.Base UnitTelephoneDate and timeDate:22.31.2004Time:12:00 AM0-9=Date&Time=AM/PM =Save1Date:05.15.2004Time:09:30 AM0-9=Date&Time=AM/PM =SaveAM