Panasonic KX-TG2970B Operating Instructions Manual

Contents

Panasonic KX-TG2970B Operating Instructions Manual Manual pdf 52 page image

Special Features52Using the PAUSE Button (For PBX Line/LongDistance Calls)We recommend you press [REDIAL/PAUSE] on the base unit or [PAUSE/REDIAL]on the cordless handset if a pause is required for dialing with a PBX or to make along distance call.Ex. Line access number [9] (PBX)[9] [REDIAL/PAUSE] or [PAUSE/REDIAL]• Pressing [REDIAL/PAUSE] or [PAUSE/REDIAL] once creates a 3.5 secondpause. This prevents misdialing when you dial after confirming the enterednumber (p. 29, 31) or dial a stored number (p. 42).• Pressing [REDIAL/PAUSE] or [PAUSE/REDIAL] more than once increases thelength of the pause between numbers.Incoming Call ToneDuring an intercom call, you can be informed of incoming calls by 2 tones.If you set incoming call tone to ON, this incoming call tone will be heard for as longas the line is ringing. To bypass the incoming call tone, set it to OFF. To set theincoming call tone to sound 2 times, set to “2”. The factory preset is “2”.You can set the incoming call tone on the base unit or the cordless handsetseparately.1 Base unit: Press [FUNCTION/EDIT].Cordless handset: Press [CONF/FUNCTION].2 Press [ ] at “Telephone”.3 Scroll to “Ringer setting” by pressing [ ]or [ ], then press [ ].4 Scroll to “Incoming call” by pressing [ ]or [ ], then press [ ].5 Select “On”, “Off” or “2” by pressing [ ] or[ ].6 Base unit: Press [ ] (Save), then press [STOP].Cordless handset: Press the soft key ( ), then press [OFF].Base Unit HandsetPhone numberBase Unit HandsetTelephoneRinger settingIncoming callIncoming calltone :2SAVE