Panasonic KX-TG3711BX Operating Instructions Manual

Also see for KX-TG3721BX: Service manual

Answering System39Calling back (Caller IDsubscribers only)If caller information was received for the call,you can call the caller back while listening to amessage.Press {SP-PHONE} during playback.L To edit the number before calling back,press {EDIT}. Add or erase digits to thebeginning of the number as necessary.Erasing all messagesPress {ERASE} 2 times while the unit is not inuse.Listening to messagesusing the handsetWhen new messages have been recorded,“New Message” is displayed.1 To listen to new messages:{MENU}y323To listen to all messages:{MENU}y3242 When finished, press {OFF}.Note:L To switch to the receiver, press {C}.Operating the answering system{MENU} s {r}: “Answer System” s{OK}*1 If pressed within the first 5 seconds of amessage, the previous message is played.*2 To resume playback:{r}: “Play” s {OK}*3 You can also erase as follows:{ERASE} s {r}: “Yes” s {OK}Calling back (Caller IDsubscribers only)If caller information is received for the call, youcan call the caller back while listening to amessage.1 Press {MENU} during playback.2 {r}: “Call Back” s {OK}Editing the number before callingback1 Press {MENU} during playback.2 {r}: “Edit & Call” s {OK}3 Edit the number. s {C}Available for:KX-TG3821 series (page 4)Key Operation{^} or {V} Adjust the receiver/speaker volume (duringplayback)1 or {3} Repeat message(during playback) *12 or {4} Skip message (duringplayback)3 Enter the “Settings”menu4 Play new messages5 Play all messages6 Play greeting message76 Record greetingmessage8 Turn answering systemon{MENU} Pause message*29 or {STOP} Stop recordingStop playbackz Turn answering systemoff*4*3 Erase currently playingmessage*5 Erase all messages*6 Reset to a pre-recordedgreeting messageKey OperationTG37xx38xxBX(e).book Page 39 Wednesday, June 8, 2011 2:08 PM