Panasonic KX-TG4381NZ Operating Instructions Manual

Also see for KX-TG4381NZ: Operating instructions

Panasonic KX-TG4381NZ Operating Instructions Manual Manual pdf 17 page image

Making/Answering Calls17Making calls1 Lift the handset and dial the phonenumber.L To correct a digit, press {Clear}.2 Press {C} or {Call}.3 When you finish talking, press{OFF} or place the handset on thebase unit or charger.Using the speakerphone1 Dial the phone number, and press{s}.L Speak alternately with the otherparty.2 When you finish talking, press{OFF}.Note:L For best performance, use thespeakerphone in a quiet environment.L To switch back to the receiver, press{C}.Adjusting the receiver or speakervolumePress {^} or {V} repeatedly whiletalking.Making a call using the redial listThe last 5 phone numbers dialled arestored in the redial list (each 48 digitsmax.).1 {REDIAL}2 {V}/{^}: Select the desired phonenumber.3 {C}Erasing a number in the redial list1 {REDIAL}2 {V}/{^}: Select the desired phonenumber.3 {Erase} i {Yes} i {OFF}Pause (for PBX/long distance serviceusers)A pause is sometimes required whenmaking calls using a PBX or longdistance service. When storing a callingcard access number and/or PIN in thephonebook, a pause is also needed(page 21).Example: If you need to dial the lineaccess number “9” when making outsidecalls with a PBX:1 {9} i {PAUSE}2 Dial the phone number. i {C}Note:L A 3.5 second pause is inserted eachtime {PAUSE} is pressed. Repeat asneeded to create longer pauses.Answering callsWhen a call is being received, the ringerindicator flashes rapidly.1 Lift the handset and press {C} or{s} when the unit rings.L You can also answer the call bypressing any dial key from {0} to{9}, {*}, or {#}. (Any keyanswer feature)2 When you finish talking, press{OFF} or place the handset on thebase unit or charger.Auto talkYou can answer calls simply by lifting thehandset off the base unit or charger. Youdo not need to press {C}. To turn thisfeature on, see page 24.TG43xxNZ(e)_OI.book Page 17 Tuesday, August 26, 2008 1:58 PM