Panasonic KX-TG4381NZ Operating Instructions Manual

Also see for KX-TG4381NZ: Operating instructions

Panasonic KX-TG4381NZ Operating Instructions Manual Manual pdf 45 page image

Useful Information45Battery rechargeMaking/answering calls, intercom*1 KX-TG4391/KX-TG4392Problem Cause/solutionThe handset beeps and/or7 flashes.L Battery charge is low. Fully charge thebatteries (page 14).I fully charged the batteries, but7 still flashes or 8 isdisplayed.L Clean the charge contacts and charge again(page 14).L It is time to replace the batteries (page 13).I fully charged the batteries, butthe operating time seems to beshorter.L Clean the battery ends (S, T) and thecharge contacts with a dry cloth, and chargeagain.Problem Cause/solutionNoise is heard, sound cuts inand out.L You are using the handset or base unit in anarea with high electrical interference. Placethe base unit and use the handset away fromsources of interference.L Move closer to the base unit.L Your unit is connected to a telephone line withDSL/ADSL (JetStream) service. Werecommend that you contact your DSL/ADSLservice provider to have an DSL/ADSL Splitterinstalled. We do not recommend the use ofgeneric DSL/ADSL filters. Contact yourDSL/ADSL provider for details.The handset does not ring. L The ringer volume is turned off. Adjust theringer volume (page 24).L Night mode is turned on. Turn it off (page 26).The base unit does not ring.*1 L The ringer volume is turned off. Adjust theringer volume (page 18).I cannot make a call. L The handset is too far from the base unit.Move closer and try again.L Dial lock is turned on. To turn it off, see page19.L If the above remedy does not solve theproblem, set the dialling mode. Press{MENU} {#} {1} {2} {0} {Save} {OFF}.L The unit is not designed to be used withrotary/pulse dialling services.TG43xxNZ(e)_OI.book Page 45 Tuesday, August 26, 2008 1:58 PM