Panasonic KX-TG5050 Operating Instructions Manual

Special Features40Key ToneYou can select whether or not the handset keys will sound tones (key tone,confirmation tone, error tone). The factory preset is ON.Re-registering the HandsetIf “No link to base. Move closer to base and try again.” isdisplayed even when using the handset near the base unit, the handset may havelost communication with the base unit. You need to re-register the handset to thatbase unit.• Have both the handset and base unit nearby during registration.• Follow steps 1 and 2 listed below. You have about 1 minute to completethem.• If the handset beeps 3 times and “Error!!” is displayed, an error occurred. Tryagain from step 1.• You can stop registration by pressing [OFF] on the handset and pressing[LOCATOR] on the base unit.1 Press [MENU].2 Scroll to “Initial setting” by pressing[d] or [B], then press the soft key ( ).3 Scroll to “Key tone” by pressing [d] or [B],then press the soft key ( ).4 Select “Off” or “On” by pressing [d] or [B].5 Press the soft key ( ), then press [OFF].1 Base unit: Press and hold [LOCATOR] for 3 seconds.• The CHARGE indicator flashes.2 Handset: Press and hold [FLASH/CALLWAIT] until “Handset Registering” isdisplayed.• After registration is complete, a long beepsounds from the handset.HandsetSELECT Initial settingSELECT Key toneKey tone:OnSAVEHandset & Base UnitSPIPRIVACY1HandsetRegisteringIN USESPIPRIVACY1Handset [1]RegisteredIN USE