12Programmable SettingsProgramming GuidelinesThe unit has several programmable functions which can be selected from thefunction menu on the display (p. 13).How to select a function item from the menu• To go back to the previous menu, press the soft key ( ), or press the soft key( ) while “---(Go back)----” is displayed. If you press this key in themain menu, the unit will exit programming mode.• After programming is complete, the display will return to the main menu or thesub-menu depending on which menu the selected item is located. (See the menutable on page 13.)• You can exit programming mode at any time by pressing [OFF].• If you do not press any buttons for 60 seconds, the unit will exit programming mode.• If the unit detects a problem, an error message will be displayed (p. 46) and/orerror beeps will sound.Make sure the handset and base unit are not being used. The handset mustbe operated near the base unit and while off the base unit.1 Press [MENU].• The main menu is displayed (p. 13).2 Scroll to the desired item by pressing [d] or [B].3 Press the soft key ( ) to select the desired item.4 If the item has a sub-menu, select the menu item (p. 13).Repeat steps 2 and 3 until the desired item is displayed.If the item has no sub-menu, go to step 5.5 Select the desired setting by pressing [d] or[B], then press the soft key ( ).• A confirmation tone will be heard and the settingwill be saved.6 Press [OFF] to exit programming mode.HandsetSAVESAVEBACKBACKSAVE[OFF] exitsprogramming.Navigator key scrollsthrough the menu. [MENU] enters thefunction menu.The soft key works asthe or key.The soft key worksas the key.BACK SAVESELECTBRinger settingdBACK PLAY SELECTSELECTSAVEdBBACK PLAY SAVEBACKSELECT