Programmable Settings14Display LanguageYou can select either “English” or “Spanish” as the display language. The factorypreset is “English”.• If you select a language you cannot read, change the display language againusing direct commands (p. 45).Dialing ModeIf you have touch tone service, set the dialing mode to “Tone”. For rotary or pulseservice, set to “Pulse”. The factory preset is “Tone”.1 Press [MENU].2 Scroll to “Initial setting” by pressing[d] or [B], then press the soft key ( ).3 Scroll to “Change language” by pressing[d] or [B], then press the soft key ( ).4 To change from English to Spanish, press thesoft key ( ).To change from Spanish to English, press thesoft key ( ).• The display changes to the selected language.• You can also select the display language bypressing [d] or [B].5 When Spanish is selected, press the soft key ( ), then press [OFF].When English is selected, press the soft key ( ), then press [OFF].1 Press [MENU].2 Scroll to “Initial setting” by pressing[d] or [B], then press the soft key ( ).3 Scroll to “Set tel line” by pressing [d] or[B], then press the soft key ( ).4 Press the soft key ( ) at “Set dialmode”.5 Select “Pulse” or “Tone” by pressing [d] or[B].6 Press the soft key ( ), then press [OFF].HandsetSELECT Initial settingSELECT Change languageESPAÑOLENGLISHDisplay:EnglishGUARDARSAVEHandsetSELECT Initial settingSELECT Set tel lineSELECTSet dial modeSet dial mode:ToneSAVE