Panasonic KX-TG5511BX Operating Instructions Manual

Panasonic KX-TG5511BX Operating Instructions Manual Manual pdf 33 page image

Answering System33Erasing all messagesPress {4} 2 times while the unit is not inuse.Listening to messagesusing the handsetWhen new messages have beenrecorded, u is displayed on thehandset with the total number of newmessages.1 To listen to new messages:8 i {#}{3}{2}{3}To listen to all messages:8 i {#}{3}{2}{4}2 When finished, press {ic}.Note:L To switch to the receiver, press {C}.L If “Messages Full” is shown on thedisplay, u and the total number ofnew messages are not displayed.Operating the answeringsystem8 i {V}/{^}: “Answer System”i M*1 If pressed within the first 5 seconds ofa message, the previous message isplayed.*2 To resume playback:{V}/{^}: “Play” i M*3 You can also erase as follows:W i {V}/{^}: “Yes” i MCalling back (Caller IDsubscribers only)If caller information is received for thecall, you can call the caller back whilelistening to a message.1 Press 8 during playback.2 {V}/{^}: “Call Back” i MEditing the number before callingback1 Press 8 during playback.2 {V}/{^}: “Edit & Call” i M3 Edit the number. i {C}Key Operation{^} or {V} Adjust the receiveror speaker volume(during playback){1} or {<} Repeat message(during playback) *1{2} or {>} Skip message(during playback){3} Enter the“Settings” menu{4} Play new messages{5} Play all messages{6} Play greetingmessage{7}{6} Record greetingmessage{8} Turn answeringsystem on8 Pause message*2{9} or O Stop recordingStop playback{0} Turn answeringsystem off{*}{4}*3 Erase currentlyplaying message{*}{5} Erase all messages{*}{6} Reset to a pre-recorded greetingmessageKey OperationTG5511_6511_6521BX(e).book Page 33 Tuesday, June 8, 2010 9:17 AM