Caller ID Service36 For assistance, please visit http://www.panasonic.com/consumersupportCaller ID number auto edit featureOnce you call back an edited number (see“Editing a caller’s phone number beforecalling back” on page 35), the unit canautomatically edit other incoming phonenumbers each time you receive a call.For example, you can use this feature toset the unit to ignore the area code ofcallers in your area code, so that you cancall these local numbers using callerinformation without dialing the area code.To activate this feature, you must edit anitem in the caller list (see “Editing a caller’sphone number before calling back” onpage 35), then call that number. After that,calls from that caller’s area code will beedited automatically.This feature can be turned on or off (page55). The default setting is ON.Note:L The handset can remember up to 4 areacodes to be edited. Phone numbers fromthe 4 most recently edited area codeswill be automatically edited.L This feature will not be activated untiledited numbers are called back.L If you move to another area, you canturn this feature off to erase previouslyedited area codes. To use this featureagain, turn it on and reprogram the areacodes you want to edit once again.Storing caller information intothe phonebookItems in the caller list can be stored intoeach handset’s phonebook.1 Press {CID} (left soft key).2 Push the joystick up or down repeatedlyto display the desired item.L To edit the number, press {EDIT}repeatedly until the number is shownin the desired format (see “Editing acaller’s phone number before callingback” on page 35, step 3).3 Press {SAVE}.L If there is no name information for thecaller, “Enter name” will bedisplayed.1 Enter the name if necessary (seepage 27, step 3).2 Press {NEXT}, then press {SAVE}.L To continue storing other items,repeat from step 2.4 Press {OFF}.Note:L If the caller information does not includea phone number, you cannot store it inthe phonebook.Erasing caller informationErasing a selected item1 Press {CID} (left soft key).2 Push the joystick up or down repeatedlyto display the desired item.3 Press {CLEAR}.L To erase other items, repeat fromstep 2.L To exit the caller list, press {OFF}.Erasing all itemsMake sure that you have no missed calls.1 Press {CID} (left soft key).2 Press {ERASE} or {CLEAR}.L “All erase?” will be displayed.L To cancel erasing, press {NO}.3 Press {YES}.