Panasonic KX-TG5561M Operating Instructions Manual

Also see for KX-TG5561: Operating instructions Operating instructions Operating instructions Quick guide

Contents

Panasonic KX-TG5561M Operating Instructions Manual Manual pdf 50 page image

Programmable Settings50 For assistance, please visit http://www.panasonic.com/consumersupportmelody or a song, you will not be able todistinguish lines by their ringers.L If you select a melody or a song, theringer will continue to sound for severalseconds if:– the caller hangs up before you answerthe call.– another person answers the call usinganother phone connected on thesame line.L The preset song “Demo1” in this productis used with permission of © 2005 SpeedCrazy.L The preset song “Demo2” in this productis used with permission of © 2005 M-ZoNE Co., Ltd.Recording songs from an audiodevice for ringer tones(Customize ring)You can record songs (max. 30 secondseach) from an audio device by connectingthe included audio cable. These songs canbe assigned as the handset ringer tone(page 49) and the ringer ID (page 33) forphone numbers stored in the phonebook.Important:L If a call is received while the audio cableis connected to the handset, disconnectthe audio cable from the handset andanswer the call, or you and the caller willnot hear each other’s voice.L If a call is received while a song is beingrecorded or played back, recording orplayback will stop automatically. Ifrecording, the partially recorded songwill be saved. The caller will hear thesong being played and you and thecaller will not be able to hear eachother’s voice until you disconnect theaudio cable from the handset.1 Connect the audio device to thehandset using the included audio cable.2 Press {MENU} (center of joystick).3 Scroll to K, then press {SELECT}.4 Scroll to “Customize ring”, thenpress {SELECT}.5 Scroll to “Record”, then press{SELECT}.L The remaining recording time will bedisplayed.6 Press play on the audio device.L For better sound quality, increase thevolume on the audio device.L To adjust the handset speakervolume, push the joystick up or downrepeatedly.7 Press {REC.} to start recording.8 To stop recording, press {STOP}.L To listen to the recording, scroll to“Playback”, then press {SELECT}.L To re-record, scroll to “Retry”, press{SELECT}, then start from step 7.9 Scroll to “Save”, then press {SELECT}.10 Enter the desired name (max. 15characters, page 27).Audio cableAudio device(such as a stereocomponent,CD player, or PC)Headphoneoutput, linelevel output,etc.Example:Audio jack