Panasonic KX-TG5771 Operating Instructions Manual

Also see for KX-TG5771: Operating instructions Quick guide Operating instructions Operating instructions Quick guide

Contents

Panasonic KX-TG5771 Operating Instructions Manual Manual pdf 59 page image

Answering SystemFor assistance, please visit http://www.panasonic.com/help 59*1 If pressed within the first 5 seconds of amessage, the previous message isplayed.*2 To resume operation, enter a remotecommand within 3 seconds, or thevoice guidance starts.Turning on the answering systemremotelyIf the answering system is off, you can turnit on remotely.1 Dial your phone number.2 Let the phone ring 15 times.L The unit answers your call with thegreeting message.L You can hang up, or if you call from atouch tone phone, you can enter yourremote code and begin remoteoperation (page 58).Skipping the greeting message to leavea messageYou can leave a message just as anyoutside caller can. Call your phonenumber. When the answering systempicks up, press {*} to skip the greetingmessage and record your message afterthe beep.Answering systemsettingsRemote codeA remote code must be entered whenoperating the answering system remotely.This code prevents unauthorized partiesfrom listening to your messages remotely.The default setting is “111”.1 {MENU} (middle soft key) i{#}{3}{0}{6}2 Enter the desired 3-digit remote code.i {SAVE} i {OFF}Ring countYou can change the number of times thephone rings before the unit answers calls.The default setting is “4 rings”.“Toll saver”: The unit answers on the2nd ring when new messages have beenrecorded, and on the 4th ring when thereare no new messages. If you call yourphone from outside to listen to newmessages (page 58), you will know thatthere are no new messages when thephone rings for the 3rd time. You can thenhang up without being charged for the call.1 {MENU} (middle soft key) i{#}{2}{1}{1}2 Select the desired setting. i {SAVE}i {OFF}{9} Stop recording/playback*2{0} Turn answering systemoff{*}{4} Erase currently playingmessage{*}{5} Erase all messagesKey Remote commandHandsetHandset