Panasonic KX-TG6021C Operating Instructions Manual

Answering System35Listening to messagesusing the handsetWhen new messages have beenrecorded:– “New message” is displayed.– The message indicator on thehandset flashes slowly if the messagealert feature is turned on (page 38).1 {MENU}2 {V}/{^}: “Message play” i{Select}L The handset plays new messages.L When you have no new messages,the handset plays back allmessages.3 When finished, press {OFF}.Note:L To switch to the receiver, press {C}.Voice guidanceIf you do not press any buttons after thelast message is played back, thehandset’s voice guidance starts.Operate the answering system byfollowing the guidance as necessary.Calling back (Call Displaysubscribers only)If caller information was received for thecall, you can call the caller back whilelistening to the message.1 Press {Select} during playback.L To edit the number before callingback, press {Edit} repeatedly toselect the desired format (page26).2 {Call}Operating the answeringsystemYou can also operate the answeringsystem by pressing dial keys on thehandset during playback.*1 If pressed within the first 5 secondsof a message, the previousmessage is played.*2 To resume operation, press acommand key within 15 seconds, orthe voice guidance will start.Key Operation{^} or {V} Adjust the receiver/speaker volume{1} or {<} Repeat message(during playback) *1{2} or {>} Skip message (duringplayback){4} Play new messages{5} Play all messages{8} Turn answering systemon{9} Stop playback *2{0} Turn answering systemoff{*}{4} or{Erase}Erase messagecurrently playing{*}{5} Erase all messagesTG602X_603X_605XC(e).book Page 35 Tuesday, December 26, 2006 1:55 PM