Answering System368 i {#}{3}{2}{3}To listen to all messages:8 i {#}{3}{2}{4}2 When finished, press {ic}.Megjegyzés:L To switch to the receiver, press {C}.L If “Üz. mem. tele” is shown on thedisplay, u and the total number of newmessages are not displayed.Operating the answering system8 i {V}/{^}: “Üzenetrögz.berendezés” i M*1 If pressed within the first 5 seconds of amessage, the previous message isplayed.*2 To resume playback:{V}/{^}: “Lejátszás” i M*3 You can also erase as follows:W i {V}/{^}: “IGEN” i MCalling back (Caller IDsubscribers only)If caller information is received for the call,you can call the caller back while listening toa message.1 Press 8 during playback.2 {V}/{^}: “Visszahívás” i MEditing the number before calling back1 Press 8 during playback.2 {V}/{^}: “Szerkeszt és Hív” iM3 Edit the number. i {C}Erasing all messages1 8 i {#}{3}{2}{5}2 {V}/{^}: “IGEN” i M i {ic}Remote operationUsing a touch-tone phone, you can call yourphone number from outside and access theunit to listen to messages or changeanswering system settings. The unit’s voiceguidance prompts you to press certain dialkeys to perform different operations.Remote access codeA 3-digit remote access code must beentered when operating the answeringsystem remotely. This code preventsKey Operation{^} or {V} Adjust the receiver orspeaker volume(during playback){1} or {<} Repeat message(during playback)*1{2} or {>} Skip message (duringplayback){3} Enter the“Beállítások”menu{4} Play new messages{5} Play all messages{6} Play greeting message{7}{6} Record greetingmessage{8} Turn answering systemon8 Pause message*2{9} or O Stop recordingStop playback{0} Turn answering systemoff{*}{4}*3 Erase currently playingmessage{*}{5} Erase all messages{*}{6} Reset to a pre-recorded greetingmessageKey OperationTG6511-6521HG(e-hg).book Page 36 Friday, January 22, 2010 2:49 PM