Panasonic KX-TG6511HG Operating Instructions Manual

Answering System37unauthorised parties from listening to yourmessages remotely.Fontos:L In order to operate the answering systemremotely, you must first set a remoteaccess code.1 8 i {#}{3}{0}{6}2 To turn on remote operation, enter thedesired 3-digit remote access code.3 M i {ic}Deactivating remote operationPress {*} in step 2 on „Remote accesscode”, 36. oldal.L The entered remote access code isdeleted.Using the answering systemremotely1 Dial your phone number from a touch-tone phone.2 After the greeting message starts, enteryour remote access code.L The unit announces the number ofnew messages.3 Press {9} to start voice guidance.4 Follow the voice guidance prompts asnecessary or control the unit usingremote commands (37. oldal).5 When finished, hang up.Megjegyzés:L You can also leave a message just as anyoutside caller can. After the greetingmessage starts, press {*} to skip thegreeting message and record yourmessage after the beep.Remote commandsRemote commands are presented by voiceguidance in the following order:*1 If pressed within the first 5 seconds of amessage, the previous message isplayed.*2 This command is not included in voiceguidance.*3 To repeat the voice guidance, press {9}again.Turning on the answering systemremotelyIf the answering system is off, you can turn iton remotely.1 Dial your phone number from a touch-tone phone.2 Let the phone ring 10 times.L A long beep is heard.3 Enter your remote access code within 10seconds after the long beep.L The greeting message is played back.L You can either hang up, or enter yourremote access code again and beginremote operation (36. oldal).Key Operation{1} Repeat message(during playback)*1{2} Skip message(during playback){4} Play new messages{5} Play all messages{6} Play greeting message*2{7} Record greeting message{9} Repeat the voice guidance(playback or recording*3 isstopped){0} Turn answering system off{*}{4} Erase currently playingmessage{*}{5} Erase all messages{*}{6} Reset to a pre-recordedgreeting message (duringgreeting messageplayback)*2{*}{#} End remote operation(or hang up)*2Key OperationTG6511-6521HG(e-hg).book Page 37 Friday, January 22, 2010 2:49 PM