Panasonic KX-TG6582T Operating Instructions Manual

Also see for KXTG6582 - PHONE SYSTEM: Operating instructions Quick guide

Contents

Panasonic KX-TG6582T Operating Instructions Manual Manual pdf 16 page image

Link to Cell16 For assistance, please visit http://www.panasonic.com/helpphone is connected to the baseunit. You are ready to makecellular calls.4 To select which unit receives callsfor the cellular line, press {OK} thencontinue from step 3, “Selectingwhich unit receives cellular calls”,page 16.L If not required, go to step 5.5 {OFF}Note:L Make sure that your cellular phone isset to connect to this productautomatically. Refer to your cellularphone’s operating instructions.L Make sure you cancel your cellularphone’s current registration if youwant to register it to the other line(page 19).Link to cell settingsSelecting which unit receivescellular callsYou can select which unit rings andreceives calls for a cellular line. When“All” is selected, all handsets and thebase unit ring.1 {MENU}2 For CELL 1: {#}{6}{2}{7}{1}For CELL 2: {#}{6}{2}{7}{2}3 {V}/{^}: Select the desired handsetor “All”.4 {SAVE} i {OFF}Note:L When you select a specific handset toreceive calls for a cellular line:– other handsets cannot answer thecalls.– the base unit can answer the callseven though it does not ring.However, you can make the baseunit ring by adjusting the base unitringer volume (page 36).L When you change the setting to“All”, the base unit ringer volumealso returns to the lowest level even ifthe ringer volume has been changed.Ring as cell modeOnce this feature is turned on, thehandset and base unit ring using thesame ringer tone as your cellular phone.The following settings are available:– “Off”: Turn this feature off to use theringer tones of the handset and baseunit. Caller information is announceddepending on the Talking Caller IDsetting (page 35).– “On (with Talking CID)”(default): The handset and base unituse your cellular phone’s ringer tone.Caller information is announced evenif the Talking Caller ID is turned off.– “On (without Talking CID)”:The handset and base unit use yourcellular phone’s ringer tone. Callerinformation is not announced even ifthe Talking Caller ID is turned on.Important:L To use this feature, your cellularphone must support Bluetooth in-band ringtone. Refer to your cellularphone’s operating instructions.1 {MENU}2 For CELL 1: {#}{6}{1}{4}{1}For CELL 2: {#}{6}{1}{4}{2}3 {V}/{^}: Select the desired setting.4 {SAVE} i {OFF}Note:L The units use the preset ringer tones(page 36) instead of your cellular