Panasonic KX-TG6582T Operating Instructions Manual

Also see for KXTG6582 - PHONE SYSTEM: Operating instructions Quick guide

Contents

Panasonic KX-TG6582T Operating Instructions Manual Manual pdf 45 page image

Caller ID Service45For assistance, please visit http://www.panasonic.com/help3 To call back, press {SELECT}, thenpress {C}.To exit, press {OFF}.Note:L If the entry has already been viewedor answered, “Q” is displayed, even ifit was viewed or answered usinganother handset.L u or v indicates the callerinformation was received from thecellular line.Editing a caller’s phonenumber before calling backYou can edit a phone number in thecaller list by removing its area codeand/or the long distance code “1”.1 {<} CID2 {V}/{^}: Select the desired entry.L If > is displayed, not all of theinformation is shown. To see theremaining information, press {>}.To return to the previous screen,press {<}.3 Press {SELECT}, then press{EDIT} repeatedly until the phonenumber is shown in the desiredformat.4 Using a cellular line:To make a cellular call, continuefrom step 4, “Viewing the caller listand calling back”, page 44.Using the landline:To make a landline call, press {C}.Caller ID number auto editfeatureOnce you call back an edited number,the handset which was used to call backremembers the area code and format ofthe edited number. The next timesomeone calls from the same area code,caller information is customized by thehandset as follows:– When the call is being received, theCaller ID number is displayed in thesame format as the edited number.– After the call has ended, the caller’sphone number is displayed in thesame format as the edited number,when reviewed from the caller list.For example, you can use this feature toset the handset to ignore the area codeof callers in your area, so that you cancall these local numbers using callerinformation without dialing the areacode.To activate this feature, you must edit anentry in the caller list, then call thatnumber. After that, phone numbers fromthat caller’s area code are editedautomatically.This feature can be set for each handset(page 35). The default setting is “On”.Note:L Phone numbers from the 4 mostrecently edited area codes areautomatically edited.L If you move to another area, you canturn this feature off to erase previouslyedited area codes. To use this featureagain, turn it on and reprogram thearea codes you want to edit onceagain.1 Local phone numberExample: 321-55552 Area code – Local phone numberExample: 555-321-55553 1 – Area code – Local phonenumberExample: 1-555-321-5555