Panasonic KX-TG6611PD Operating Instructions Manual

SMS (Short Message Service)33Using SMSSMS allows you to send and receive text messagesbetween other fixed-line and mobile phones thatsupport compatible SMS networks and features.Fontos:L To use SMS features, you must:– subscribe to a Caller ID and/or an appropriateservice such as SMS.– confirm that SMS is turned on.– confirm that the correct message centrenumbers are stored.Contact your service provider/telephonecompany for details and availability.Megjegyzés:L A total of 47 messages (at 160 characters/message) can be saved. Total number may bemore than 47 if length of messages is less than160 characters/message.L If the unit is connected to a PBX system, youmay not be able to use SMS features.Turning SMS on/offThe default setting is “KI”.1 8(3572 {r}: Select the desired setting. s M s{ic}Storing SMS message centrenumbersSMS message centre numbers must be stored inorder to send and receive SMS messages. Contactyour service provider/telephone company for moreinformation.1 To store “1.Üzenet központ”:8(351To store “2.Üzenet központ”:8(3522 Edit the number as necessary. s M s{ic}Megjegyzés:L For PBX users:– You need to add the PBX line access numberand a dialling pause to the beginning of theMessage Centre 1 number.– If you only use the Message Centre 1 numberfor SMS, store the Message Centre 1 numberas is (without adding a line access number ordialling pause) to Message Centre 2.Sending a messageWriting and sending a new message1 8(35)2 {r}: “Új üzenet” s M3 Enter a message. s ML You can change the character entry modeby pressing / (42. oldal).4 Enter the destination phone number (20 digitsmax.). s MTo use the redial list:{>} (R) s {r}: Select the phone number.s M 2 timesTo use the caller list:{<} (y) s {r}: Select the party. s M 2timesL If > is displayed, not all of the informationis shown. To see the remaining information,press {>}. To return to the previous screen,press {<}.To use the phonebook:n s {r}: Select the phonebook entry. sM 2 times5 To save the message, select “IGEN”. s M6 To send the message, press M.L To cancel sending, press {ic}.Megjegyzés:L This unit supports SMS messages of up to 612characters, however, the maximum number ofcharacters you can send or receive may belimited by your SMS service provider/telephonecompany. Contact your SMS service provider/telephone company for details.L If your message contains over 160 characters,the message is a long message and “*Hosszúüz.*” is displayed. Your service provider/telephone company may treat long messagesdifferently from other messages. Contact yourservice provider/telephone company for details.L If your phone is connected to a PBX, store thePBX line access number (34. oldal).Editing/sending a saved message1 8(35)TG6611_6621PD(e-hg).book Page 33 Monday, February 14, 2011 10:53 AM