Panasonic KX-TG6671C Operating Instructions Manual

Panasonic KX-TG6671C Operating Instructions Manual Manual pdf 19 page image

Note:R When storing a calling card access number andyour PIN in the phonebook as one phonebookentry, press MPAUSEN to add pauses after thenumber and PIN as necessary (page 13).R If you have rotary/pulse service, you need topress * (TONE) before pressing M N on thebase unit or MMENUN on the handset in step 1 tochange the dialing mode temporarily to tone.When adding entries to the phonebook, werecommend adding * (TONE) to the beginningof phone numbers you wish to chain dial(page 17).Speed dialYou can assign 1 phone number from thephonebook to each of the 5 speed dial buttons.Base unitAssigning a phonebook entry to aspeed dial button1 Find the desired entry (page 18).2 Press the speed dial button you want to assignto. a MSELECTNR If “Overwrite” is displayed, the buttonyou selected has a phone number alreadyassigned to it.To overwrite with the currently selectedphone number, go to step 3.To select another button, press MBACKN,then repeat this step.3 MSELECTN a MnN (EXIT)Note:R In step 2, you can also press MMENUN. a“Speed Dial” a MSELECTN aMbN: Select the desired speed dial button. aMSELECTNR If a speed dial button has already beenassigned, “ ” is displayed next to the button instep 2.Making a call using a speed dialbutton1 Press the desired speed dial button.2 Lift the corded handset.Note:R In step 1, if no phone number is stored to thespeed dial button, you can assign a number bypressing M N and continue from step 1,“Assigning a phonebook entry to a speed dialbutton”, page 19.Cancelling a speed dial assignment1 Press the desired speed dial button. aMERASEN (soft key)2 MbN: “Yes” a MSELECTNIndex cardUse the index card to record the names/phonenumbers stored on the speed dial buttons.CoverIndex card19Shared Phonebook