Error messagesDisplay message Cause/solutionAccess # to VM serviceis not storedR You have not stored the Voice Mail access number. Store thenumber (page 37).Base no powerorNo link. Re-connectbase AC adaptor.R The handset has lost communication with the base unit. Movecloser to the base unit and try again.R Unplug the base unit’s AC adaptor to reset the unit. Reconnectthe adaptor and try again.R The handset’s registration may have been cancelled. Re-registerthe handset (page 27).Busy R The called unit is in use.R Other units are in use and the system is busy. Try again later.R The handset you are using is too far from the base unit. Movecloser and try again.Check tel line R The supplied telephone line cord has not been connected yet ornot connected properly. Check the connections (page 8).Error!! R Recording was too short. Try again.Invalid R There is no handset registered to the base unit matching thehandset number you entered.R The handset is not registered to the base unit. Register thehandset (page 27).Requires subscriptionto Caller ID.R You must subscribe to a Call Display service. Once you receivecaller information after subscribing to a Call Display service, thismessage will not be displayed.Use rechargeablebattery.R A wrong type of battery such as Alkaline or Manganese wasinserted. Use only the rechargeable Ni-MH batteries noted onpage 4,5.42Useful Information