Panasonic KX-TG6711FX Operating Instructions Manual

Sub-menu 1 Sub-menu 2 Settings CodeNight Mode On/Off 1: On0: <Off>#238 26Start/End <23:00/06:00> #237 27Ring Delay 1: 30 sec.2: <60 sec.>3: 90 sec.4: 120 sec.0: No Ringing#239 27First Ring*1, *7 – 1: <On> 0: Off #173 –*1 If you program these settings using one of the handsets, you do not need to program thesame item using another handset.*2 This feature allows the unit to automatically adjust the date and time each time callerinformation including date and time is received.To turn this feature on, select “Caller ID”. To turn this feature off, select “Manual”.(Caller ID subscribers only)To use this feature, set the date and time first (page 13).*3 If you select the unit’s region setting (page 28) to “Česká rep.” or “Slovensko”, thedefault setting will be changed for the selected country.*4 If you select the unit’s region setting (page 28) to “Česká rep.” or “Slovensko”, thedefault setting is “On”.*5 The ringer tone may continue to play for several seconds even if the caller has already hungup. You may either hear a dial tone or no one on the line when you answer the call.*6 The preset melodies in this product are used with permission of © 2010 Copyrights VisionInc.*7 If you do not want the unit to ring before the caller information is received, set to “Off”.(Caller ID subscribers only)You can only remove the first ring if the unit rings two times or more by default, whichdepends on your service provider/telephone company.*8 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing anykeys, including confirmation tones and error tones.*9 If you subscribe to a Caller ID service and want to view the caller’s information after lifting upthe handset to answer a call, turn off this feature.*10 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBXsupplier if necessary.*11 The default setting will be as follows if you select the following regional codes whenchanging the unit’s region setting (page 28):“Česká rep.” = “100 msec.”“Slovensko” = “100 msec.”*12 To prevent other users from joining your conversations with outside callers, turn this featureon.*13 KX-TG6751FX*14 KX-TG6711FX*15 This menu is not displayed when scrolling through the display menus. It is only available indirect command code.25ProgrammingTG6711_51FX(en)_0803_ver101.pdf 25 2012/08/03 11:58:56