Panasonic KX-TG6711FX Operating Instructions Manual

3 To edit a number:a Edit the phone number. aa M NTo erase a number:a MbN: “Yes” a a M NNote:R When editing, press the desired dial key toadd, to erase.Setting call restrictionYou can restrict selected handsets fromdialling certain numbers. You can assign up to6 phone numbers to be restricted, and selectwhich handsets are to be restricted. Storingarea codes here prevents the restrictedhandsets from dialling any phone number inthat area code.1 #2562 Enter the base unit PIN (default: “0000”).R If you forget your PIN, contact anauthorised service centre.3 Select the handsets to be restricted bypressing 1 to 6.R All handsets registered to the base unitare displayed.R “ ” is displayed next to the selectedhandset numbers.R To cancel a selected handset, pressthe same dial key again. “ ”disappears.45 Select a memory location by pressing 1to 6. a6 Enter the phone number or area code tobe restricted (8 digits max.). a aM NR To erase a restricted number, press.Changing the base unit PIN(Personal Identification Number)Important:R If you change the PIN, please make note ofyour new PIN. The unit will not reveal thePIN to you. If you forget your PIN, contactan authorised service centre.1 #1322 Enter the current 4-digit base unit PIN(default: “0000”).3 Enter the new 4-digit base unit PIN. aa M NChanging the unit’s regionsetting/Resetting the base unit1 #1362 MbN: Select the desired country. a“Other” = countries except Czech andSlovakia“Česká rep.” = Czech“Slovensko” = Slovakia3 MbN: “Yes” a a M NNote:R The following items will be deleted or resetto their default settings:– SMS settings (page 23)– Time adjustment– Base unit transmission power– Privacy mode– Base unit PIN– Dial mode– First ring– All SMS messages– Caller list– Voice mail messages– Call restrictR The following items will be retained:– Display language– Date and time– Handset name– Repeater mode– Call barred listR If you select the desired country in step 2,the following default settings will bechanged for the selected country’s defaultsettings:– Recall/flash time (page 24)– Message centre 1 and 2 (page 23)– SMS on/off (page 23)R After changing the unit’s region setting/resetting the base unit, is displayed on28ProgrammingTG6711_51FX(en)_0803_ver101.pdf 28 2012/08/03 11:58:56