Special programmingAlarmAn alarm sounds at the set time for 1 minuteand is repeated 5 times at 5 minute intervals(snooze function). A text memo can also bedisplayed for the alarm. A total of 3 separatealarm times can be programmed for eachhandset. You can set one of 3 different alarmoptions (once, daily, or weekly) for each alarmtime.Important:R Set the date and time beforehand(page 13).1 #7202 Select an alarm by pressing 1 to 3. a3 MbN: Select the desired alarm option. a“Off”Turns alarm off. Go to step 9.“Once”An alarm sounds once at the set time.“Daily”An alarm sounds daily at the set time.Go to step 5.“Weekly”Alarm sounds weekly at the set time(s).4 Proceed with the operation according toyour selection in step 3.n Once:Enter the desired date and month. an Weekly:MbN: Select the desired day of the weekand press . a5 Set the desired time. a6 Enter a text memo (10 characters max.;page 38). a7 MbN: Select the desired alarm tone. aR We recommend selecting a differentringer tone from the one used foroutside calls.8 MbN: Select the desired snooze setting.a9 a M NR When the alarm is set, is displayed.Note:R Press to stop the alarm completely.R When the handset is in use, the alarm willnot sound until the handset is in standbymode.R Press any dial key, MSmart functionN, orto stop the sound but keep thesnooze function activated.R If you want to make an outside call whenthe snooze function is activated, pleasestop the snooze function before making thecall.Night modeNight mode allows you to select a period oftime during which the handset will not ring foroutside calls. This feature is useful for timeperiods when you do not want to be disturbed,for example, while sleeping. Night mode canbe set for each handset.Important:R Set the date and time beforehand(page 13).R If you have set the alarm, the alarm soundseven if the night mode is turned on.Turning night mode on/off1 #2382 MbN: Select the desired setting. aR If you select “Off”, press M N toexit.26ProgrammingTG6711_51FX(en)_0803_ver101.pdf 26 2012/08/03 11:58:56