Panasonic KX-TG6811NZ Operating Instructions Manual

Also see for KX-TG6811NZ: Operating instructions

Panasonic KX-TG6811NZ Operating Instructions Manual Manual pdf 30 page image

R Press any dial key, M N, or M N to stopthe sound but keep the snooze functionactivated.R If you want to make an outside call whenthe snooze function is activated, pleasestop the snooze function before making thecall.Night modeNight mode allows you to select a period oftime during which the handset will not ring foroutside calls. This feature is useful for timeperiods when you do not want to be disturbed,for example, while sleeping. Night mode canbe set for each handset.Important:R Set the date and time beforehand(page 15).R We recommend turning the base unit ringeroff (page 26) in addition to turning the nightmode on. (KX-TG6821 series: page 3)R If you have set the alarm, the alarm soundseven if the night mode is turned on.Turning night mode on/off1 M N#2382 MbN: Select the desired setting. a MOKNR If you select “Off”, press MeN toexit.3 Enter the desired hour and minute youwish to start this feature. a MOKNR You can select 24-hour or 12-hourclock format (“AM” or “PM”) bypressing *.4 Enter the desired hour and minute youwish to end this feature. a MOKN5 MeNR When the night mode is set, isdisplayed.Changing the start and end time1 M N#2372 Continue from step 3, “Turning nightmode on/off”, page 30.Setting the ring delayThis setting allows the handset to ring duringnight mode if the caller waits long enough.After the selected amount of time passes, thehandset rings. If you select “No Ringing”,the handset never rings during night mode.1 M N#2392 MbN: Select the desired setting. a MOKNa MeNNote:R When the answering system answers thecall, this feature does not work.(KX-TG6821 series: page 3)Changing the handset nameEach handset can be given a customisedname (“Bob”, “Kitchen”, etc.). This is usefulwhen you make intercom calls betweenhandsets. You can also select whether or notthe handset name is displayed in standbymode. The default setting is “No”. If you select“Yes” without entering any handset name,“Handset 1” to “Handset 6” is displayed.1 M N#1042 Enter the desired name (max. 10characters; page 45).R If not required, go to step 3.3 MOKN4 MbN: Select the desired setting. a MOKN2 times5 MeNIncoming call barring (Caller IDsubscribers only)This feature allows the unit to reject calls fromspecified phone numbers that you do not wantto answer such as junk calls.When a call is received, the unit does not ringwhile the caller is being identified. If the phonenumber matches an entry in the call barredlist, the unit emits no sound to the caller, anddisconnects the call.30ProgrammingPNQX5803YA_0719_ver122.pdf 30 2013/07/19 10:53:44