Panasonic KX-TG7100 Operating Instructions Manual

Also see for KX-TG7100: Service manual

Preparation9Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333ConnectionsBase unitWhen connecting the AC adaptor to thebase unit, a short beep will be heard. If it isnot heard, check the connections.Charger (KX-TG7102, KX-TG7103, KX-TG7122, and KX-TG7123 only)Connect the AC adaptor to the charger androute the cable as shown. The charger canbe mounted on the wall, if required.Note:L Never install telephone wiring during alightning storm.L The AC adaptor must remain connectedat all times. (It is normal for the adaptor tofeel warm during use.)L The AC adaptor should be connected to avertically oriented or floor-mounted ACoutlet. Do not connect the AC adaptor to aceiling-mounted AC outlet, as the weightof the adaptor may cause it to becomedisconnected.L The unit will not work during a powerfailure. We therefore recommend youalso connect a corded-type telephone(without AC adaptor) to the sametelephone line using a T-adaptor. YourPanasonic sales shop can offer you moreinformation about connection possibilities.LocationL For maximum distance and noise-freeoperation, place your base unit:– away from electrical appliances such asTVs, radios, personal computers orother phones.– in a convenient, high and centrallocation.Batteryinstallation/replacementImportant:L Use only the included rechargeablebatteries noted on page 4, 6.L When replacing batteries, we recommendusing the Panasonic rechargeablebatteries noted on page 5, 6.1 Press the notch on the handset coverfirmly and slide it in the direction of thearrow.L When replacing batteries, remove theold batteries positive (S) terminal first.Use only the included ACadaptor and telephoneline cord.(220–240 V, 50 Hz)To telephonenetworkHook(220–240 V,50 Hz)Screws25 mmHooksUse only the included AC adaptor.TG7100-7120E(e).book Page 9 Tuesday, July 4, 2006 3:29 PM